Time for a little uppgrade!!
The chassi is almost done and itīs on wheels.
So now I started with the engine and gearbox, first I took it outside for big washup.
Then i took it all apart and cleaned it all up.
I will replace the bearings shells the piston rings, oil and waterpump the camshaft bearings. I got a new camshaft a Kent cam FR32. The head will be skimmed for 1.5mm and I will modify it a little bit. The flywhell is about 1.5kg lighter. At the top it will be a pair of dellorto 40mm.
It will not be a raceengine but I hope for about 130-140hp
Regards Janne